Plastics Ancillary & Automation Equipment

  • Hopper Loaders, Self-contained [Shini]

    Self-contained SAL-330 / 360 series adopt single phase carbon brush motor with superior suction power and easy installation. It is particularly suitable for conveying new materials. SAL-430 / 460 series use a three phase inductive motor with low nois...
    more info
  • Hopper Loaders, Separate Vacuum [Shini]

    SAL-G series “Standard” separate-vacuum hopper loaders are suitable for conveying material over long distance. SAL-700G/800G/800G2 are for one to one combination, while SAL-900G/900G2 are for one to two combination. All models adopt stainless steel h...
    more info
  • Water Chillers [Shini]

    SIC-W/A series are applicable for cooling moulds which reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of cooli...
    more info
  • Anti-vibration Machine Level Pads [CTS]

    A solid foundation for heavy industrial machinery subject to constant vibration, shock and other related mechanical stress; you need durable machine mounts that offer fixed positioning, level-adjustable installation, and a long service life. Higher i...
    more info
  • Baling Machine

    ORWAK COMPACT 3210 Strong compaction on the spot Orwak Compact earned its name thanks to its compact design. The small footprint in combination with the low height provides plenty of placement opportunities. This range is the right choice for c...
    more info
  • Baling Machine

    ORWAK COMPACT 3115 Strong compaction on the spot Orwak Compact earned its name thanks to its compact design. The small footprint in combination with the low height provides plenty of placement opportunities. This range is the right choice for c...
    more info
  • Baling Machine

    ORWAK POWER 3320 Stronger. Faster. Smarter. Orwak Power, a range of really strong, dynamic balers, is fueled by our Black Star Technology – an innovative hydraulic concept providing more strength and greater durability. Orwak Power also f...
    more info
  • Baling Machine

    ORWAK POWER 3325 Stronger. Faster. Smarter. Orwak Power, a range of really strong, dynamic balers, is fueled by our Black Star Technology – an innovative hydraulic concept providing more strength and greater durability. Orwak Power also f...
    more info
  • Baling Machine

    ORWAK POWER 3420 Stronger. Faster. Smarter. Orwak Power, a range of really strong, dynamic balers, is fueled by our Black Star Technology – an innovative hydraulic concept providing more strength and greater durability. Orwak Power also f...
    more info
  • Baling Machine

    ORWAK POWER 3620 Stronger. Faster. Smarter. Orwak Power, a range of really strong, dynamic balers, is fueled by our Black Star Technology – an innovative hydraulic concept providing more strength and greater durability. Orwak Power also f...
    more info
  • Baling Machine

    ORWAK POWER 3820 Stronger. Faster. Smarter. Orwak Power, a range of really strong, dynamic balers, is fueled by our Black Star Technology – an innovative hydraulic concept providing more strength and greater durability. Orwak Power also f...
    more info
  • Baling Machine

    ORWAK COMPACT 3110 Strong compaction on the spot Orwak Compact earned its name thanks to its compact design. The small footprint in combination with the low height provides plenty of placement opportunities. This range is the right choice for c...
    more info
  • Baling Machine

    ORWAK MULTI 5070HDC One HEAVY DUTY machine – many types of waste Orwak Multi is a range of top-loaded multi-chamber balers designed to facilitate sorting and compacting different types of material at source. The products feature duo chamb...
    more info
  • Baling Machine

    ORWAK MULTI 9020 One machine – many types of waste Orwak Multi is a range of top-loaded multi-chamber balers designed to facilitate sorting and compacting different types of material at source. The products feature duo chambers as standar...
    more info
  • Baling Machine

    ORWAK HORIZONTAL BALER Automatic solutions for continuous output of mill-size bales Fully automated horizontal balers meet the challenges presented by centralized and large-scale waste handling in many businesses that produce large volumes of p...
    more info
  • Compactor

    PRODUCTS Orwak is happy to provide you with high quality bags and straps, which are suitable to and recommended for our balers and waste compactors. The Orwak brand on the bags and on the boxes of all supplies is a symbol of authenticity. The supp...
    more info
  • Compactor

    ORWAK MULTIPRODUCTS One machine – many types of waste Orwak Multi is a range of top-loaded multi-chamber balers designed to facilitate sorting and compacting different types of material at source. The products feature duo chambers as stan...
    more info
  • Compactor

    TOMPRODUCTS Works well under pressure The multi-tasking TOM is a new cool waste compaction system for public places. Ideal locations are restaurants, cafés, food courts, airports, bus and train stations, theme parks and malls. TOM i...
    more info
  • Compactor

    SUPPLIESPRODUCTS Orwak is happy to provide you with high quality bags and straps, which are suitable to and recommended for our balers and waste compactors. The Orwak brand on the bags and on the boxes of all supplies is a symbol of authenticity. ...
    more info
  • Compactor

    ORWAK FLEXPRODUCTS Designed to stand out to suit your needs The Orwak Flex product family features a collection of applications to meet special needs in waste handling and compaction ­– e.g. for mixed waste in bags, hazardous waste th...
    more info
  • Compactor

    ORWAK FLEX 5031 The 5031 model is a small, tough and versatile baler. It can make standard bales, compact waste in bags and/or be used to enclose bales in plastic bags! Press force: 3 ton Bale weight cardboard/plastic: 40 kg/60 kg Designe...
    more info
  • Compactor

    ORWAK COMPACTPRODUCTS Strong compaction on the spot Orwak Compact earned its name thanks to its compact design. The small footprint in combination with the low height provides plenty of placement opportunities. This range is the right choice fo...
    more info
  • Compactor

    ORWAK FLEXPRODUCTS Designed to stand out to suit your needs The Orwak Flex product family features a collection of applications to meet special needs in waste handling and compaction ­– e.g. for mixed waste in bags, hazardous waste th...
    more info
  • Compactor

    ORWAK FLEXPRODUCTS Designed to stand out to suit your needs The Orwak Flex product family features a collection of applications to meet special needs in waste handling and compaction ­– e.g. for mixed waste in bags, hazardous waste th...
    more info
  • Compactor

    ORWAK MULTIPRODUCTS One machine – many types of waste Orwak Multi is a range of top-loaded multi-chamber balers designed to facilitate sorting and compacting different types of material at source. The products feature duo chambers as stan...
    more info
  • Compactor

    ORWAK FLEXPRODUCTS Designed to stand out to suit your needs The Orwak Flex product family features a collection of applications to meet special needs in waste handling and compaction ­– e.g. for mixed waste in bags, hazardous waste th...
    more info
  • Compactors/Baling Machines

    Compactors/Baling Machines
    more info
  • Conveyors [Shini]

    Shini manufactures five types of belt conveyor as follows under technical license from a leading european manufacturer. PNL series conveyors feature reliable performance and ease of operation and are suitable for use with CB or SV series conveying or...
    more info
  • Dehumidifiers [Shini]

    SD-H series honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40?.This seri...
    more info
  • Gravimetric Blenders [Shini]

    SGB series gravimetric blenders can be used in the fields of injection moulding machines, blow moulding machines and extrusion lines for proportionally precise mixing of several types of material. This series machines adopt SIEMENS PLC controller and...
    more info
  • Hopper Dryers [Shini]

    SHD series “Standard” hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly ...
    more info
  • Hopper Magnets [CTS]

    These are an essential element for protection of every plastics processing machine. Installed in the feed hopper they remove any ferrous metal contamination before it can damage screws, barrels and dies. Complete range of round bar magnets from 5"...
    more info
  • Impulse Heat Sealers, Foot Operated [CTS]

    Widely used for easy packing of PE, PP bags with firm, durable impulse sealing up to 600mm wide with electronic control. The Impulse Foot Sealers, with their injection die-casting body, are ideal for sealing large heavy bags. By having a foot cont...
    more info
  • Impulse Heat Sealers, Hand Operated [CTS]

    Widely used for easy packing of PE, PP bags with firm, durable impulse sealing up to 300mm wide with electronic control. Compact in size, light in weight.
    more info
  • Material Hoppers/Bins/Silos

    Material Hoppers/Bins/Silos
    more info
  • Material Mixing and Blending [Shini]

    To achieve the aim of mixing material, screw blades are used to generate vortex. Materials are sucked towards mixing screws at the center of hopper bottom by vortex, then materials whirl upward to the top and fall down so that the evenly mixing can b...
    more info
  • Metal Detectors [Mesutronic]

    Tunnel Metal Detectors are used at various stages of the production process. They detect parts of a broken mold in your injection molding machine, they detect metallic contaminants in roll sheeting, they detect metallic particles in bags of plas...
    more info
  • Metal Separators [Mesutronic]

    Metal separators detect even the fi nest metallic contaminants and reject them reliably and automatically without interruption of the production process while causing very little loss of „good“ material. They protect automatic injection molding ...
    more info
  • Mixers, Auger [CTS]

    Features * Large Diameter Stainless Steel Auger * Highly Polished Stainless Steel Contact Parts for Ease of Cleaning * Designed for Automatic Operation * Small Footprint * Easy Access for Cleaning, Maintenance and Reduced Downtime These ...
    more info
  • Mixers, Fountain Blend [CTS]

    These mixers are designed to mix large quantities of resins or like products very quickly. They can be easily fed with the initial ingredients via the inlet hopper (580mm high) and the mixed product can be easily removed from the mixer via the outlet...
    more info
  • Mould Clamps, Best [CTS]

    Die Clamps are used for holding dies in processing machine platens.Forged sprung steel, V slot design with broad range of clamping angles. Offers strongest clamping force of all clamps. Features: 1. Forged from spring steel in one-time forming, hig...
    more info
  • Mould Clamps, Boat [CTS]

    Die Clamps are used for holding dies in processing machine platens.Forged sprung steel for strength and lightness. Broad range of clamping angles for irregular shapes. Features: 1. Forged from spring steel in one-time forming, high rigidity, high e...
    more info
  • Mould Clamps, Slotted Die [CTS]

    Die Clamps are used for holding dies in processing machine platens.Super alloy steel for high rigidity. Ideal for prevention of mould slipping in injection moulders. Quick and safe to use. Features: 1. Made of super alloy steel, with high rigidity ...
    more info
  • Mould Temperature Controllers [Shini]

    STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the c...
    more info
  • Proportional Valves [Shini]

    SPV-U series proportional valves mix regrind and new materials in a proper proportion, and then send them back to the moulding machine to achieve a proportional mixing and loading effect. It features directly mounted on loaders or mounted on the pipe...
    more info
  • Robotics and Automation Equipment [Shini]

    The SS series robot is designed for rapid and precise removal of sprue or runner from injection moulding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for...
    more info
  • Rotary Unions and Mechanical Seals [Filton]

    Precision does not accept compromises, which is why Telford Smith is exclusive agent for FILTON in Australasia. FILTON are renowned for their state of the art Rotary Unions and Mechanical Seals. FILTON Rotary Unions are self-contained and self-suppo...
    more info
  • Rupture Plugs [Telford Smith]

    Rupture Plugs for Extrusion Applications Rupture plugs are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Dynisco's model BP420 rupture plug is designed speci...
    more info
  • Screw Compactors, for Plastic Foam Waste Recycling [Runi]

    Historically, the RUNI Screw Compactor was developed to compact EPS fish boxes for the fishing industry, but it has since proved useful for many other purposes.With changing specifications and accessories there is prac...
    more info
  • Screw Compactors, for Plastic Foam Waste Recycling [Runi]

    For drying plastic films such as PE silage wrap for recycling. With the Runi Screw Compactor we are able to press the water out of PE films more efficiently and effectively then any other process.  With the ability of drying 700-800kg/hr usin...
    more info
  • Venturi Loaders [Shini]

    VL series venturi loaders use fast flowing pressurized air to create a vacuum that is used to convey various plastic granules. Air pressure is around 6~8kgf/cm2.Features European Type appearance , compact in size and light-weighted. Stainless stee...
    more info
  • Volumetric Colour Dosers [Shini]

    SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master- batch or additives. A gear motor with gear ratio of 38 : 1 or 75:1 is coupled to a dosing screw of 12, 14 or 16mm diameter to give a total o...
    more info
  • Water Chillers, Central Air-cooled [Shini]

    SICC-A series are applicable for cooling moulds to reduce products moulding cycle, also they are available in the cooling of equipment in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling...
    more info
  • Water Chillers, Central Water-cooled [Shini]

    SICC-W series are applicable for cooling moulds which reduce products moulding cycle, also they are available in the cooling of equipment in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of coolin...
    more info
  • Water Cooling Towers and Pumps [CTS]

    Mesan Water Cooling towers are available in all sizes from 10 ton to more than 1000 tons. All models are made from FRP panels and the infill from PVC for long life. The fan motors are TECO fully waterproof models for reliable long life.The DHL pumps ...
    more info
  • Water Flow Meters [CTS]

    Onda Water Flow Meters are required to control the flow and temperature of water through your die and/or processing machine. This gives you the ultimate in die temperature control for the most accurate and fastest moulding conditions your processing ...
    more info